Place of Origin:
CHINA
Brand Name:
senring
Certification:
CE, ISO9001
Model Number:
3402004
Voltage Range:
0~440VAC/VDC
Insolution Resistance:
<500MΩ/300VDC
Pipe Size:
4~6mm Pipe, M5quot; Port
Passages(Gas):
2 Passages
Max. Operating Pressure:
Positive Pressure 1Mpa, Vacuum -90kPa
Max. Operating Speed:
250RPM Continously, 1000RPM Intermittently
Two Passage Electrical Rotary Union Support Transmit Mixed Power And Signals
Description of 3402004 Hollow Shaft Slip Ring
The SenRing 3402004 series pneumatic rotary joint is a dual-channel rotary joint that can rotate 360 degrees to transmit two channels of compressed air, steam, vacuum, and other gas media. It is suitable for 4mm and 6mm air pipes. In addition, this 3402 series rotary pneumatic joint can not only transmit gas but also mix and transmit various electric currents ranging from 2A to 800A. This rotary joint is characterized by its small size, light weight, low torque, and multiple gas passages that do not interfere with each other.
one example of an industrial application where low torque is important is in robotics. In robotic systems, low torque rotary joints are often used to transmit compressed air, vacuum, and other gases to the robotic arm, grippers, and other end-effectors. The low torque reduces the energy required to rotate the robotic arm and perform tasks, which results in lower power consumption and less wear and tear on the system's components.
Additionally, low torque rotary joints can improve the precision and accuracy of the robotic system, which is essential for performing tasks that require precise movement and control. For example, in assembly line applications, robotic arms need to be able to pick up and place small components with precision and accuracy. Any excess torque in the rotary joint can cause the arm to overshoot the target, leading to errors in the assembly process.
Therefore, by using low torque rotary joints in robotic applications, overall system efficiency can be improved, resulting in better performance, lower energy costs, and reduced maintenance expenses.
Technical Specification of 3402004 Hollow Shaft Slip Ring
| Passages(Gas) | 2 passages |
| Pipe Size | 4~6mm pipe, M5quot; Port |
| Mechanical Data | |
| spec. | data |
| Working life | 20millions for ref(depends on working conditions) |
| Max. Operating Speed | 250RPM continously, 1000RPM intermittently |
| Working temp. | -30°C~80°C |
| Work humidity | 0~85% RH |
| Contact Materia | Precious Metal |
| Housing Material | aluminum alloy |
| IP Grade | IP51 |
| Max. Operating Pressure | Positive Pressure 1Mpa, Vacuum -90kPa | |
| torque | <0.2N.m | |
| Electrical Data | ||
| spec. | data | |
| Power | Signal | |
| Voltage range | 0~440VAC/VDC | 0~440VAC/VDC |
| Insolution resistance | <500MΩ/300VDC | <500MΩ/300VDC |
| Lead wire spec. | AWG17# Silver-plated teflon wire | AWG22# Silver-plated teflon wire |
| Lead wire length | standard 250mm (can be customized) | |
| Insolution resistance | 500VAC@50Hz,6s | |
| Electrical noise | <0.01Ω | |
Features of 3402004 Hollow Shaft Slip Ring
1. Can rotate with a mechanical arm.
2. Supports mixed power and signal transmission (e.g. USB, HDMI, Ethernet, VGA, etc.).
3. 360° transmission of compressed air, steam, vacuum, and various pressures.
4. Maximum pressure of 1Mpa (higher pressure can be customized).
5. Supports 2 M5 ports for 4~6mm pipes.
6. Standard hollow shaft size of 20mm.
Part no. description
Drawing
Standard model list
| Model | Passages(Gas) | Port Size | Pipe Size |
| 3402004 | 2 passages | M5 | 4∼6mm |
| Model | Passages(Gas) | Port Size | Pipe Size | Power/Signal(5A/10A) | Length L(mm) |
| 3402004-0605 | 2 Passages | M5 | 4∼6mm | 6 | 34.5 |
| 3402004-1205 | 2 Passages | M5 | 4∼6mm | 12 | 52.5 |
Service hotline
+86-755-29717812
Phone：+86 18100274370
ADDRESS：No.36 Xingda Road, Yanchuan Community, Yanluo Street, Bao'an District, Shenzhen
Copyright © 2010~2024 SENRING Electronics Co.,Limited All rights reserved.
