Shenzhen Senring Electronics Co., Ltd specialized in the production of 360° Rotating Slip Ring& Rotary Unions & Joints and customized services.
Capsule Slip Ring|Electrical Rotary Union|Slip Rings Supplier-Senring

Contact Us
Address:No.36 Xingda Road, Yanchuan Community, Yanluo Street, Bao'an District, Shenzhen Chat Now

SlipRing NEWS

How do you wire a through hole slip ring?

DATA:2024-04-01 15:58 CLICK:

Wiring a through hole slip ring involves carefully connecting the electrical circuits to ensure proper functionality without hindering the 

rotational movement of the slip ring. Here's a general guide to wiring a through hole slip ring:

1.Gather the necessary tools:

Wire strippers

Soldering iron and solder

Multimeter for testing continuity and verifying connections


2.Prepare the slip ring:

Carefully identify the through hole slip ring's inner and outer rings.

Ensure that any protective covers are removed, allowing access to the conductive rings.

3Identify the electrical paths:

Determine the number of circuits required for your application (e.g., power, signal, data).

Identify the corresponding terminals on the slip ring for each circuit.

through hole slip ring with flange

4.Prepare the wires:

Strip the insulation from the ends of the wires to expose the conductive metal cores.

Tin the wire ends with solder to facilitate easier and more secure connections.

5.Connect the wires to the slip ring:

Solder the prepared wire ends to the appropriate terminals on the slip ring, ensuring good electrical contact and mechanical stability.

Be mindful of potential twisting or tugging forces on the wires and provide strain relief if necessary.

6.Test the connections:

Use a multimeter to check for continuity between the wire ends and the respective terminals on the through bore slip ring. This ensures that the 

connections are solid and that there are no short circuits.

7.Secure the connections:

Once the connections have been verified, consider using insulating materials or tapes to protect the connections from environmental factors 

and to prevent short circuits.

8.Assemble and test:

Once all connections are made and secured, assemble the slip ring into its intended application.

Test the functionality of the slip ring by rotating it to verify that the electrical connections remain stable throughout the full range of motion.

Always refer to the manufacturer's documentation for specific instructions and safety considerations when wiring through hole slip rings, as 

variations may exist based on the design and intended use of the slip ring.

For more details on Through hole slip rings products, please view :

Contact Us

Service hotline


Phone:+86 18100274370


ADDRESS:No.36 Xingda Road, Yanchuan Community, Yanluo Street, Bao'an District, Shenzhen

rotary union pneumatic_High Frequency Rotary Joint Slip Rings
WhatsApp contact

Copyright © 2010~2024 SENRING Electronics Co.,Limited 非商用版本 

Copyright © 2010~2024 SENRING Electronics Co.,Limited All rights reserved.